susie@jxgreentape.com
Polyester and PET tapes cover a wide range of industrial uses, but they are not all selected for the same reason. Some are used for temporary masking during coating or painting. Some are chosen for thin electrical insulation. Others are used for bonding, mounting, die-cut parts, or holding hog rings and C rings in strips.
This page brings together our main PET-based tape products for buyers who need custom widths, roll lengths, slit rolls, converted parts, or bulk supply. Tell us what the tape needs to do, not only the tape name. Different adhesive systems behave very differently in masking, insulation, bonding, and fastener collation.
PET Silicone Masking Tape is made with polyester film and silicone adhesive. It is mainly used for powder coating masking, plating masking, painting protection, and temporary heat-process masking.
This tape is often selected when buyers need a more economical masking option than polyimide tape for moderate high-temperature processes. It can protect selected surfaces during coating, finishing, or short heating cycles. Before ordering, it is better to confirm the working temperature, dwell time, surface material, and residue requirement.
For this product, common sourcing terms include PET silicone masking tape supplier, polyester silicone masking tape, and powder coating masking tape supplier.
Polyester Film Electrical Tape is used for thin insulation, wrapping, and general electrical protection. It is also commonly known in the market as Mylar tape or PET insulation tape.
Typical applications include transformer insulation, motor coil wrapping, capacitor wrapping, battery pack insulation, and wire harness protection. Buyers usually care about film thickness, adhesive type, insulation performance, color, width, and roll handling. Electrical values should always be confirmed by the exact product grade and available test data, not assumed from the general product name.
Mylar is a commonly used trade name for polyester film. We use it here only as a sourcing reference.
Hot Melt PET Tape for Hog Ring and C Ring Collation is used to hold hog rings or C rings in strips. The purpose is not electrical insulation or carton sealing. The key is stable strip holding, clean feeding, and easier handling during storage, transport, and pneumatic tool use.
This tape is suitable for hog ring and C ring applications in mattress production, automotive seats, cages, fencing, wire mesh, and other industrial fastening processes. Width, holding strength, strip stability, and feeding performance should be confirmed according to the ring size and equipment.
Relevant sourcing terms include hog ring hot melt tape supplier, C ring collating tape manufacturer, and hot melt PET tape for fastener collation.
Double Sided PET Tape with Red Liner uses a PET carrier coated with adhesive on both sides. The red liner is a release film, not the tape body. It helps protect the adhesive surface and improves handling during slitting, lamination, die cutting, and assembly.
This tape is used for nameplate bonding, panel mounting, electronics assembly, foam lamination, trim bonding, gaskets, and die-cut pads. It can be supplied as rolls, strips, sheets, or converted parts. Before production, buyers should confirm adhesive type, total thickness, liner requirement, bonding surface, and working environment.
Common sourcing terms include double sided PET tape supplier, double coated PET tape manufacturer, and die cut PET tape supplier.
|
Your Application |
Start With |
|
Powder coating, plating, painting, or temporary heat masking |
PET Silicone Masking Tape |
|
Transformer, motor, coil, capacitor, or battery insulation |
Polyester Film Electrical Tape |
|
Hog ring or C ring strip holding |
Hot Melt PET Tape for Hog Ring & C Ring Collation |
|
Bonding, mounting, lamination, or die-cut parts |
Double Sided PET Tape with Red Liner |
If the application is not clear, send us the surface material, working temperature, tape width, and quantity. We can suggest a more suitable PET-based tape option before bulk ordering.
We support custom sizing and converted formats for industrial PET tape orders. Available options may include slit rolls, narrow-width rolls, roll length adjustment, strips, sheets, die-cut pads, and packing for bulk orders.
For double sided PET tape, red liner options and die-cut handling are especially important. For hog ring and C ring collation, width and strip stability matter more than general tape specifications. For masking and electrical insulation tapes, adhesive type, thickness, and process conditions should be checked before production.
If you need custom PET tape converting, please send the product type, width, length, thickness, adhesive requirement, application, and expected quantity.
If your process needs higher-temperature insulation or solder masking, compare Polyimide Tape. For stronger insulation and better abrasion resistance, review Glass Cloth Tape. If you are comparing PET film tape with polyimide options, our PET Tape vs Polyimide Tape guide may help you choose the right material before ordering.
Tell us what the tape needs to do, not only the tape name. Different PET-based tapes behave very differently in masking, insulation, bonding, and fastener collation.
Please send your product type, width, length, thickness, adhesive type, liner requirement, application, quantity, and die-cut drawing if custom parts are needed.
